By Harry ! Last Updated: September 01, 2020
Commonly known as irrigation pumps, sprinkler water pumps are essential in any sprinkler system. The sprinkler heads which spread water to the required regions of your lawn or garden need the help of the sprinkler water pumps. There are various designs and brands to choose from and most buyers don’t know how to choose the best sprinkler water pumps.
This ultimate guide and reviews on the six best sprinkler water pumps according to our opinion will help you make an informed decision when making a purchase. It also includes the different things you should consider when shopping for a sprinkler water pump that suits you.
Selecting the Best Sprinkler Water Pumps in September, 2020
1. WAYNE WLS150
2. Flotec FP5172
3. GOULDS Pumps GT15 IRRI
4. WAYNE PLS100
5. Red Lion RL-SPRK100
Recommended 6 Best Sprinkler Water Pumps – In Depth Reviewed
1. Wayne WLS150 1.5 HP Lawn Sprinkling Pump High Volume Cast Iron – (Editor’s Choice)
The Wayne WLS150 is undoubtedly one of the best sprinkler pumps, especially for a large system. It is a cast-iron sprinkler pump with the capability of drawing huge volumes of water from any water source. It can pump 2320 gallons per hour at a pressure of 30psi which is pretty great. It also has a dual voltage system to ensure you can work with both 230 and 115-volt electrical power outlets.
It is low powered, however, at 39GPM which was quite unsatisfactory to some of the clients. This is not a big problem and you can always overlook it considering the amount of work that this sprinkler pump can accomplish.
Most sprinkler water pumps with the capability of the Wayne WLS150 are considered to be quite expensive. However, the Wayne WLS150 is rather decently priced and it works maintenance-free for several years. It also includes high-quality fittings that greatly boosts its performance. The impeller is fashioned from quality reinforced thermoplastic which lasts for long without needed repair or replacement.
One of the best sprinkler pumps when dealing with large sprinkler systems. It delivers dependable service for many years making it great for both domestic and commercial use. It produces a little sound which is a huge advantage.
2. Flotec FP5172 1.5 HP Pump Sprinkler – High capacity sprinkler pump with a lot of power - (Editor’s Choice)
This corrosion-resistant self-priming sprinkler water pump has a high-capacity and incredible strength. With 1.5 HP, the Flotec FP5172 pumps water at a pressure of 30psi and therefore gives 45 GPM. It has one of the highest quality electrical motors in the current technological market, the A.O Smith high-torque. This sprinkler water pump can pump up to 67 gallons of water per minute and therefore comfortably operate around 12-15 sprinkler heads.
The seams are leaky and you have to be very careful when installing it. Hire a professional during the installation stage to ensure you get the best from this sprinkler pump. Leaky seams are a problem that can be fixed and only takes a short period.
The design of the Flotec FP5172 is corrosion resistant enabling it to last a long time even under high pressure booster pump. It has a dual-voltage system both the 115 and 230-volt. The casing of this sprinkler pump is reinforced fiberglass making it ideal for outdoor installation. It also supports auto-sprinkler thus greatly reducing the workload for you.
This sprinkler pump is great for commercial use due to its automatic sprinkler capabilities. It can also power up to 30 sprinkler heads which makes it great for large lawns and irrigation systems.
3. Goulds pumps GT15 1.5 HP IRRI-Gator Centrifugal self-priming Pump – Easy to install
When looking for a sprinkler pump that requires no skill to set-up, the Goulds GT15 is your best answer. It distributes water evenly across large areas and is considered ideal for large yards with plants and or grass. It is a single-phase self-priming irrigation pump with a powerful motor of 1.5 HP. This centrifugal water sprinkling pump is as effective as they come.
It is, however, known to jam every once in a while but you could always get used to that. Simply restart your pump and everything should resume working normally. Most buyers found this to a little irritating but the price is rather affordable.
The good thing about the Goulds GT15 is that it is fully-serviceable. This means that, unlike other designs, you could always service and replace worn out parts to ensure your pump serves a long time. Just ensure certified experts service your pump to ensure everything is looked at thoroughly and fixed.
This pump offers great performance and is maintenance-free. It can comfortably accommodate a sprinkler system with 15-20 sprinkler heads making it great for both commercial and domestic use.
4. Wayne 1HP PLS100 Stainless Steel Sprinkling Pump – Charming design with incredible performance
The Wayne PLS100 has a charming design with a stainless steel casing that is corrosion resistant and durable. It also includes a debris strainer built-in to prevent clogging over time. It is capable of transferring up to 720 gallons per hour making its performance quite impressive. Light-duty watering jobs can be done using this sprinkler pump effectively with good results.
The cord is, however, short according to most of its customers. This problem can be fixed using an extension or by simply installing it close to a power-point. You don’t need the help of an expert to introduce an extension and it won’t cost you much.
This water sprinkler pump is easy to use especially due to its dedicated off/on switch. It also has built-in handles to ensure you can easily transport it. The 115-volt motor has a dedicated fan to ensure you get the most out of this pump and it does not overheat after running continuously.
This sprinkler pump is great for domestic use with a sprinkler system of about 2-3 sprinkler heads. It is long-lasting and will serve for long periods without requiring any maintenance. The design is also quite charming.
5. Red Lion RLSP-200 – High performance that never disappoints
The 2 horsepower Red Lion RLSP-200 is a class-leading model that supports both intermittent and continuous watering. It is specially designed for heavy-duty jobs with the capability of moving up to 70 gallons per minute. The housing is made of cast-iron to ensure it is long-lasting and suitable for outdoors. It is also both corrosion and rust-resistant making it quite valuable.
Yes, this sprinkler pump is very powerful, but occasionally it leaks at high temperatures. This can be avoided by letting the pump cool after long operation hours. The leakages at high temperatures, however, are minimal and do not interfere greatly with the performance of the water sprinkler pump.
The Red Lion RLSP-200 has a compact design that makes it easy to set up even in small spaces. This is a huge advantage over other sprinkler pumps that are tedious to set up due to their design and wiring. The voltage selector included in the pump works with almost all electrical outlets making it even more convenient for the users.
The Red Lion RLSP-200 is great when you have a sprinkler system with over 15 sprinkler heads. It is great for commercial use too and the price is fair when you consider its massive capability.
6. 1.6 HP Homdox Lawn Sprinkling Booster Pump – specially designed for small irrigation systems
It is essentially a booster pump that can perform the function of a sprinkling pump. It can be used comfortably for transporting water and irrigation of small lawns and gardens. It is one of the most affordable pumps when it comes to water supply and irrigation, yet its performance is quite exceptional. It was initially designed with for freshwater supply in farms, rural homes, and cabins. The pump’s body Is made of cast iron while the head is made of stainless steel which makes it long-lasting.
Unfortunately, the 1.6 horsepower motor Homdox sprinkler makes too much noise and some users find it irritating especially when you want to maintain a quick work or home environment. However, it pumps water quickly and the price is fair.
This pump is self-priming which is a huge advantage. Priming can be rather tedious and time-consuming. This pump ensures you can rest easy knowing that you won’t ever need to perform the priming procedure. It can sufficiently accommodate 3 sprinkler heads due to its 700 gallons per hour flow rate.
This pump is great when you are looking for a cheap and portable sprinkler pump for an ordinary lawn or small irrigation system.
You may read also:
How to Choose the Best Sprinkler Water Pumps
There are certain key considerations you need to carefully look at before deciding which lawn sprinkler pump to settle on. These considerations will greatly increase your chances of purchasing the best sprinkler water pump to suit your particular needs. According to our research, these are the vital things you need to consider when selecting the best sprinkler water pump.
1. Size of your sprinkler system
When buying a new sprinkler pump or replacing an old one, you need to carefully consider the size of your sprinkler system. You do not need a sprinkler water pump with 2HP to serve two sprinkler heads when a 1/2HP pump can comfortably do the job.
All the sprinkler heads have a specific GPM AND PSI rating which will help you determine the pump size that you require. The manufacture’s chart will help you in doing the calculations. For example, when dealing with a 40 psi sprinkler head it will roughly require 3.8 gallons per minute. This means that if your sprinkler pump has a motor rating of 12 gallons per minute, then you can comfortably use your pump in a 3 sprinkler head system.
The disadvantage of using a powerful sprinkler pump in a small sprinkler system is that you will need to install a pressure regulator. The regulator brings the pressure down to ensure you’re your water pumps and pump are not weakened over time due to too much pressure.
2. Pump location
Your general terrain will determine where to place your sprinkler pump. Remember that all pumps are not able to cover the same distances. When it comes to location you need to consider both the distance and height that you want to move the water.
- Figure out the pumping height: The rise in elevation or suction head commonly refers to the lift amount required to transfer water to the pump from the source. Although some pumps can handle around 25 feet, most are not able to lift more than 5 feet. The suction lift configuration is an important consideration especially when you need to lift water long distances. Go through the pump’s specifications to find out whether the pump can handle the required lift distance for your project.
- Distance to system : The water pressure will be affected by the distance you want the water to travel before reaching the sprinkler heads. You need to also consider the distances through the discharge pipe and the size. The discharge pipe usually increases as the distance increases, but you could always have a professional give you the proper guidelines.
3. Power supply
Sprinkler pumps require electricity to run and you must consider this fact. Most pumps have a standard dual-voltage system of 230 or 115-volt option. This is, however, not always the case and you need to look at the pump’s specifications carefully. Large pumps with 2.5 HP or more usually require a 3-phase source or 230-volts.
When living in rural areas, it is best to look for sprinkler pumps with several other power supply options like solar and gas generators. This is usually because remote areas experience electrical interruptions. You, therefore, need a sprinkler pump that can be pump using other different power sources other than electricity.
4. The pump should be self-priming
With self-priming pumps, you will never have to conduct the priming yourself. This is because the pumps work using compression and buoyancy laws to automatically get rid of air in the pumping system. However, you need to add fluid in the casing before starting. Never run your sprinkler pump dry because this will lead to damage and failure of your pump.
Self-priming sprinkler pumps are generally considered as being the best. Once you install a foot or check valve, you will never have to re-prime your pipe reducing your workload immensely. Priming is a simple task but it can be time-consuming especially when you do it often.
5. The casing material
Sprinkler pumps are often kept outdoors and therefore need a long-lasting casing. The best water sprinkler pumps have stainless steel, fiberglass-reinforced or cast-iron casings to ensure your pump doesn’t get damaged by the harsh elements. Your sprinkler is made up of several components that need to be protected.
Avoid sprinkler pumps with plastic casings because they will get worn out pretty quickly and damages often occur easily. Ensure your pump’s casing is heavy-duty before purchasing it. Notice that pumps with a plastic casing are cheaper yes, but they usually don’t have warranties. This shows you that the manufacturers themselves do not have faith that their product can last for a long period.
Best Sprinkler Water Pumps Buyer’s Guide
Do I need experts to install a new sprinkler system?
Sprinkler systems are rather challenging to install by yourself because of the many different components you need to consider. For a good functioning sprinkler system that properly covers your entire lawn, you will need the help of an expert. Replacing a sprinkler water pump is, however simple once you have the entire system in place. You can replace a sprinkler pump by yourself, but installing an entire sprinkler system needs professional help.
Why is my sprinkler pump delivering too much pressure?
This problem is usually caused by you using a large sprinkler pump for a small Irrigation system. Look at your pump’s specification especially the horsepower and gallons per minute your pump is supposed to deliver. If you are using a large pump in a sprinkler system with about 3 sprinkler heads, then you need to buy a pressure regulator. The regulator will bring the pressure down thus protecting your pipes and pump from damage.
How do I know if I have a 115 or 230-volt power source for my sprinkler pump?
The best way to determine whether you have a 115 or 230- volt power source is to have a certified electrician check it for you. Alternatively, you could trace back the wiring at the power source to your circuit breaker. The wires should either connect to a double or single breaker. Should they connect to the single breaker then the voltage is 115, and the double breaker voltage is usually 230. If you are wrong, then the pump’s motor will burn and you will have to replace it. Have an electrician determine the voltage for you so that you can be sure to avoid damaging your motor.
Is it cheaper to use 115-volts rather than 230-volts?
The amount of power your sprinkler pump consumes is the same whether you are using the 115-volt or 230 volts. Your electricity bill will be the same regardless of the voltage you decide to use. When it comes to electricity, you pay for the amounts of kilowatts used. The pump will draw double the amp when running on 115 volts when compared to the 230 volts. When multiplying the volt and amp to get the number of watts used, they will be the same.
What is the pump curve?
The pump curve referred to as the performance curve, in general, is considered as very essential. It is a graph showing the general performance capability of a particular pump. Sometimes it is displayed in the form of a chart but it generally shows the same information. The pump curve will show you how well your pump can sustain a particular flow rate at specific pressures. It is, therefore important to look at the pump’s performance curve to ensure it can comfortably perform a specific task. Reading and interpreting the pump curve is rather simple and you can do it yourself.
Do automatic sprinkler systems consume more water?
Automatic sprinkler systems use less water when compared to the manual system and they could save a lot in the long run. The automatic system is programmed to shut off immediately the required amount of water your landscape needs is achieved. Unlike the manual system which you might leave to run for a couple of extra minutes every time because you are not sure whether you have poured enough water. With the manual system, you could also simply forget to turn it off from time to time and this usually leads to heavy water losses. With the automatic sprinkler system, you could always customize further with soil moisture sensors and rain shut off tools to ensure you save more water and electricity.
All the 6 mentioned sprinkler pumps are the best in the market, but our favorite was certainly the Flotec FP5172. This sprinkler pump can move water up to a distance of 20 meters and is constructed from rugged fiberglass-reinforced thermoplastic. The pump delivers enough strength to sustain a sprinkler system of 12-15 sprinkler heads. What sets it apart from the other mentioned sprinkler pumps is its A.O Smith high-torque motor. The motor is of the highest quality ensuring you always get the best from this particular pump.